01
2021
-
12
What to do if a zipper is stuck? 5 clever solutions
We come into contact with a lot of things every day, and zippers often malfunction. What if the zippers don't match? I. What if the zippers don't match? 1. Find a white wax, or even a candle, or yellowish wax, and apply it to the zipper.
Source:
We come into contact with many things every day, Zippers often malfunction. If Zippers what if they don't match?
First, if Zippers what if they don't match?
1. Find a white wax, or even a candle, or yellowish wax, and apply it to the zipper.
2. Sewing machine oil is relatively transparent and clean, and can be dripped on Zippers but don't use too much oil, otherwise it will leave residue. If you don't have sewing machine oil, you can use peanut oil or vegetable oil instead, but oil is dirty, so it's not recommended.
3. When the zipper malfunctions, if someone at home knows how to repair it, they can sew a hook on the bottom of the zipper with needle and thread, so that it can hook the square hole at the top of the zipper, Zippers making it move more smoothly and firmly, and less prone to derailment.
4. If the zipper doesn't work, you can check if there is a problem with the zipper head. You can try replacing it with a good one; some clothing stores on the street sell them.
5. If the zipper head is good, then only the entire zipper head can be completely replaced, which will completely solve the problem. When replacing, pay attention to the integrity and quality of the zipper head and zipper teeth.
Second, troubleshooting methods
1. When opening and closing is not smooth, if you pull the zipper head hard, it will cause a tooth element engagement failure. At this time, apply paraffin wax or lubricating spray to the surface and inside of the teeth,
2. Zippers then move the slider several times until it loosens. If the zipper is used to close bags with too many things in them,
the zipper is under too much stress, and the teeth will separate from the belt. This is a serious zipper malfunction. Pull the left and right teeth closer together,
so that the chain head can easily pass through and close the zipper. When opening/closing the zipper, sometimes the zipper head bites the thread or fabric,
causing the zipper head to become stuck. In this case, if you forcibly pull the zipper head, it will bite deeper and deeper. Untie the fabric while reversing the zipper head. When it is completely stuck, do not pull the puller hard, please slowly pull the puller backward. When sewing, do not leave any hidden dangers for the zipper.
4. Clothes that have been worn for a long time are not easy to use the zipper because the zipper of the zipper is loose. At this time, you can use pliers to clamp the zipper (you can also use your teeth to bite it) to tighten the zipper. The zipper will be easier to use.
Third, zippers
1. During normal use, pay attention to whether the zipper has defects such as "broken belly", "missing teeth", or "skew". If there are defects, repair them in time and do not pull hard. If the zipper is loose and comes off, gently tap the zipper head a few times with a small hammer to make the upper and lower chain teeth bite tighter, and the teeth will not come off again.
2. For aluminum alloy zippers, be careful not to contact alkaline and acidic substances. During storage, ensure adequate ventilation, do not seal storage, and do not store in a humid environment. If necessary,
Related Cases
2021-03-03
2021-03-03
2021-03-03
2021-03-03
2021-03-03
Room 401, Building 1, No. 30, Hengtang Wangjiao Road, Tangxia Town, Dongguan City, Guangdong Province
Copyright © Dongguan Zhenlun Plastics Products Co., Ltd.
Powered by: CEglobal SEO Privacy Policy
SAF Coolest v1.3 设置面板 GAGSE-ZGYF-JXSFE-ZXF
无数据提示
Sorry, this column currently has no content.!
You can view other columns or returnHome Page